Cosmetic work on Brown

Having got Brown running again I decided to do some cosmetics on the car. First I repainted the rocker cover with silver Hammerite smooth and then I refurbed the alloy wheels with some wet & dry and repainted the segments with black Hammerite smooth. The beauty of these jobs were that I didn't have to spend any more money because I already had everything I needed to do both jobs.

Handling things

The driver's door handle on Becky II broke last night when I was at the local Sainsburys. I knew it was on it's way but I didn't expect it to let go so soon. Like I did on the passenger side before the MoT I robbed a door handle from Becky to replace the broken one. Apart from trying to undo a screw with the wrong size screwdriver everything went perfectly. Becky II now has MK1 door handles on the rear doors and MK2 door handles on the front doors. Not ideal but 100% functional.

Servicing on Becky II

With another journey "down south" and with Becky II coming up to 60,000 miles I decided to do a service. First was the engine oil and filter change costing me less than £10 because I still had an oil filter among my spares. The spark plugs cost me £15 for a set of four. I thought that it was a bit steep but I'm sure that not all NGK spark plugs are created equal. There's the ones made in Japan and ones made in Brazil (or somewhere in South America) but the Japanese ones are supposed to be better quality. My £15 plugs were the Japanese ones so I'm not so worried about the price. Due to the Easter holidays I'm unable to get hold of an air filter until next Tuesday. I still had Margaret's old air filter and that was in better condition than the one that was in Becky II so I swapped the air filter. I'll do until I can get a new one. All this has made the car more responsive and hopefully I'll get even better fuel economy on my long distance run.
While I was at it I decided to tacke some minor niggles before they got any worse. One of the windcscreen washed jets was blocked so I removed the vent panel to get the jet out to unblock it. I noticed the there was a patch of rust on the bulkhead (a common rot spot that often gets missed) so I wirebrushed it to get rid of the loose rust and paint and painted it with some Hammerite.
The handbrake seemed to have quite a bit of travel and wasn't quite holding on so it was adjusted and is much better.
The front bumper had been bent so I had a try a straightening it out. The best way would have been to remove the bumper but I didn't want to fight lots of rusty bolts so I removed the nearside front corner. The bolts came out surprisingly easy so I coated the threads with copper grease to avoid any future problems. Using a steel bar I was able to straighten the bumper. It still isn't 100% perfect but it is now much better. Maybe a visit to the Guru might be the answer. I had a bit of difficulty lining up the bolt holes for the bumper corner but with the help of my persuaders (2lb lump hammer and a jack handle) I was able to get the bolts back in.
I washed the car, vaccuumed the interior ,used my upholstery cleaner on the seats and blacked the tyres.
I touched up the bootlid badges with some silver Hammerite and this has made a big difference to the look of the car.
While I had the Hammerite out I also touched up the wheels where spots of rust had appeared.