Exhausting part 3

Last night I sorted out the blowing rear joint on Snowdorp's exhaust. I undid the joint applied LOTS of exhaust paste and put it back together and now I have a 100% leak free exhaust. While I was at it I replaced the middle section rubber with one I had that was in as-new condition. The only thing left to sort out is the rear bracket. I can see some more MIG practice coming on...

Exhausting part 2

The maifold joint started blowing again so on Friday evening I removed the carbs, (for better access) undid the joint, smeared LOTS of exhaust paste both sides of the manifold gasket and put it back together. I was at the West Yorkshire TSSC meeting on Tuesday and I was talking to Mik one of my Triumph friends (he races a Spitfire 1500) and told him about my exhaust woes and he advised me to use exhaust assembly paste so I followed his words of wisdom instead of Roy's. The worst part of the job was refitting the carbs but I got there. The rear section is still bowing at the joint (I didn't use any assembly paste when I fitted it) so I'll have to sort that out when I get chance. On Saturday I took Snowdrop out to Scarborough and she didn't put a foot wrong apart from a noise on the way backwhich only appeared on the overrun. It turned out to be a couple of loose wheel nuts so once they were tightened all was well. The next day was a show for Snowdrop at Harewood House where I tagged along with West Yorkshire TSSC like I did last year. The club won a prize for their stand which was just a few Triumphs, a plain beige gazebo and some banners. It's been 350 miles since I sorted out the exhaust manifold joint and it is still holding up. I think I've cured it. Just that rear section joint and for the first time Snowdrop will have a 100% leak-free exhaust.

Photos of the "Dales Bramble"

Just thought I'd write about the "Dales Bramble" that took place on Saturday. This first pic was at the start from the Pendle & Pennine meeting venue (the Old Stone Trough in Kelbrook) there were 6 of us in 4 cars.

By the time we got here we'd lost one of the Spits back at Hawes where we'd stopped for a "comfort break". We didn't go the the Wensleydale cheese factory but I've already been there a couple of times so I wasn't bothered. It was quite enjoyable and we had a few stops at Jervaulx Abbey (good food in the tearoom), Masham and Fountains Abbey. I quite liked the straight roads and the single track roads. Snowdrop was the right car to take on this run. The exhaust had let go near Grimwith Reservoir but I was able to carry on and peeled off at Bolton Abbey and made my way back home without further incident.

Glass replacement

Yesterday evening I decided to make a start with Becky by cleaning up the broken glass. Spen turned up to see the next door neighbour and then started to help. First up, he fetched a vaccuum cleaner and the broken glasss was soon taken care of. Next we installed the replacement glass. Having done this before I was prepared having bought some washing line and some cheap washing-up liquid (75p) from the local Co-op. It went quite well and we managed to fit the trim strip using flat bladed screwdrivers. Al done in time for me to make the local TSSC meeting in time. Having done the rear glass has encouraged me to start and get this car back on the road. The carbs will be next to sort out.

Exhausting

I went down to Lincolnshire yesterday to pick up the exhaust rear section (from Roy the same guy I got the carbs from) and it was as described. Well worth it. I clocked up a total of 250 miles in Blue and despite losing a bit of power a few times the journey was trouble free. I'd already put some Redex in the tank when I filled up so that may have solved any remaining problems with the fuel system. When I got back I changed Blue's coolant and then I moved on to replace Snowdrop's exhaust rear section. The exhaust is still not leak-free because it is blowing at the manifold. Roy did impart to me some words of wisdom on the subject. I could either use bathroom sealant (still got some left from when I did the Sprint's windscreen) or lithium-based grease instead of assembly paste so I'll gave the bathroom sealant a try. Roy said he'd done the sealant on his and it has remained leak-free to this day. I balanced the carbs and there is more power. The front carb was sticking but a bit of carb cleaner has hopefully freed it. That blowing manifold gasket doesn't help though...

Good and bad news

The guy who sold me the carbs for Snowdrop sent me a linkage along with an original throttle cable so the linkage is now as it should be. I adjusted the ignition timing back to 10 deg BTDC as the car was pinking under load after my previous timing adjustment. I removed the rear exhaust section and welded it up as best I could (I'm still a crap welder) but during today's "Dales Bramble" (a run out in the Yorkshire Dales) the rear exhaust section let go. The car is still drivable but I need a new section of exhaust as I have nothing suitable in my spares collection. I have sourced a replacement so I should be back up and running soon.

The DVLA have sent me a reminder for Blue's tax. Why can't the Government reintroduce the rolling date for free road tax? One thing worse than paying tax is not paying it. My new arrival (when I get it) will cost me nothing to tax (the reason why I was interested in the car in the first place)

A few more things

Here's the latest:

One of the terminals on the starter motor to solenoid cable on Snowdrop broke. I ended up getting an off-the-shelf cable from my local Motosave costing me just over £3 and it fitted perfectly as well as solving the problem. I'm still trying to quieten my rear section of exhaust and I've resigned myself to getting it welded. I dug out my timing light last night and checked the timing and I retarded it to about 12-13 deg BTDC and it has made a difference. There is now a bit more power and it runs better. The car starts better and it doesn't run-on when I turn the ignition off. I finally got a response from the DVLA about the keeper history. I now have the name of the first registered keeper, the name of the dealer who supplied the car (Cox of Keighley) and I found out that Snowdrop is still on the original engine.

Last week one of the local kids smashed Becky's rear window. One of the dads (I'll call him Spen) has offered his help and even searched high and low for a replacement glass. I managed to get hold of one from the Acclaim Guru and Spen is not only going to help me fit it but he's gonna help me get this car back on the road so it is a blessing in disguise.

Nothing new with Blue. I might need to change the fuel filter but other than that she's running fine.

Did a bit more spannering

Yesterday evening's spannering didn't go too well. I fitted the temperature sender and now the gauge is reading higher than before. I'll check the voltage stabilizer first. I tightened the screws at the bottom of the seat back on the rear seat. I finally got round to investigating the loose radio aerial and it will never fit properly so I'm looking at a replacement. Nothing a trip to my local motor factor won't solve.

Dodgy temperature gauge

The temperature gauge stopped working over the weekend. I was able to eliminate the votlage stabilizer as the fuel gauge was working fine so I earthed the wire from the sender and it was working so I ordered a new sender from Rimmer Bros and it has arrived today. The sender was originally from the Toledo so it's no surprise it has finally died. I'm looking at adding to the fleet but as nothing's been finalized I'll be keeing the details under wraps. All I'll say is that I'll be doing the Round Britain Reliability Run in it.

Choke sorted

The choke cable arrived yesterday so I fitted it and I now have a fully operational choke. To swap the choke I had to remove the air cleaner and the reset control for my trip counter. I put some fuel treatment in the tank when I filled up yesterday. I also bought some Castrol Valvemaster Plus. It costs the same from my local Motor World as it does for Valvemaster ordinaire from Halfords so I reckoned it was worth a punt. There's a local show on this weekend so hopefully I'm all set.

A bit of fettling with Snowdrop

One of my alloys needed touching up so it was out with the black Hammerite smooth. While I was at it I did the sills, blower motor, brake servo, the radiator and the door mirror. Not perfect but it looks better than before. I also sorted out the exhaust. The tailpipe joint hadn't been done properly so I dismantled it and reassembled it making sure it was done properly this time. I found some small holes in the rear silencer so I filled them with some exhaust putty and now I have a totally leak free exhaust for the first time on this car. I've also ordered a brand new choke cable from Rimmer Bros. The choke is still sticking and the trimmed cable isn't helping.

Carb swap part 4

I managed to sort out my throttle cable problem. I fitted the brand new cable I bought from Rimmer Bros and I bridged the gap with some garden wire I found so the car is now drivable. After some road testing I had to adjust the tickover and the throttle cable but other than that it is running fine. There is more power and it doesn't struggle with passengers or when it is on a hill. (plenty of them in West Yorkshire!) The exhaust isn't entirely leak free. It is blowing at the tailpipe joint which is down to me not pushing the pipe far enough in to make a good seal. If the weather stays dry I'll tackle it tonight.

Edit: I've finally replaced that horrible aftermarket door mirror with a standard one. Definitely an improvement and the screw holes were in the right place as well. Just the passenger side to do. I've declared my mods to the insurance who wanted an extra £27. Better safe than sorry.

Carb swap part 3

The saga continues...

I managed to fit the exhaust and I got the car running but it was revving like mad. So I left it until this morning. When I investigated I found out that with the throttle cable fitted the throttle was open. On checking my parts catalogue I found out that the bracket for the throttle cable is off an automatic. Out of my 3 throttle cables none of them will fit. The exhaust seems to be leak free so it isn't all bad. Well worth the extra mileage down to Guliford.

Carb swap part 2

Here's the latest:

I've managed to fit the carbs and manifolds without too much trouble. The only thing I'm missing is the hose for the brake servo but I made it to the local Motosave just before it closed and I got what I needed along with some more antifreeze as I'd lost quite a bit of coolant when I changed the manifold hoses. (the inlet manifold has coolant running through it) The exhaust was ready to let go as the rear part of the front section had split. No wonder it was blowing. Lucky it lasted on yesterday's epic journey down south.

Part 3 to follow...

Carb swap part 1

As I've mentioned before I was planning to fit twin carbs to Snowdrop and replace the exhaust. This is the first part of this little project and part 1 is my account of getting the parts together. Yesterday I topped up Snowdrop's petrol tank before setting off on my epic journey. (epic for a Dolomite 1300 with a perforated exhaust!) First stop was Rimmer Bros in Lincoln where I picked up the small parts (nuts, bolts, washers, gaskets, etc) costing me just over £85. Next up was Roy (triplecustard on the TDC forum) who had the carbs along with the manifolds and air cleaner. Well worth £50 and just need a good clean. Another of my Dolomite friends, Derek (Autonet7 on the TDC forum) had a Dolomite 1500 exhaust that he was giving away free. He was in Guilford and I decided that having gone as far as Roy's (the bottom corner of Linolnshire about 20 miles from Peterborough) I decided to go on to Guilford. A complete exhaust would be worth the extra petrol. When I got there I wasn't disappointed. Derek had struggled to separate the front and middle sections of the exhaust without success (I knew this before I came down) but with my help we managed to separate them and I was able to fit the exhaust in Snowdrop's boot. I also took a propshaft (useful as a spare with a decent looking centre bearing) and a starter motor which we worked out was from a Dolomite 1850 so it was worthwhile. The journey back took me about 4 and a half hours which wasn't bad. I stopped off at Milton Keynes to get some petrol by which time I'd covered 405 miles. The petrol tank holds 12.5 gallons so that worked out at least 32.4 miles to the gallon and I know how far I can go on a full tank of petrol. I put £30 worth of expensive BP unleaded (£1.10 per litre!) in and that was enough to get me back the remaining 170 miles to Anita's house in Halifax. Despite doing around 70mph Snowdrop behaved all the way back and the temperature gauge remained constant (I was running the heater on hot) I was sweating even though I was wasn't wearing my fleece or jumper. I got back safely but the exhaust sounds worse. I think it is nearly ready to let go. Lucky I have a better one. Defintely worth the trip to Guilford. Total mileage: 575

Bracket

The part arived this morning in the post. Rimmer Bros have gone up in my estimation especially since they had the open day last October for the Triumph Dolomite Club. Just need to fit it and then I'm sorted! I'm in 2 minds whether to fit it while I'm at home (got the tools here) or do the job at Anita's where I can paint the bracket and keep my hands clean. (got the gloves there along with my paints)
I've also sent off a form to the DVLA requesting the keeper history. I've been wanting to find out who had the car before me. At £5 it is worth a try. I might get a Heritage certificate as well but they cost a bit more so I've been loath to do so.

I don't believe it!

Without wishing to sound like Victor Meldrew, no sooner than I get the clutch fixed something else breaks. The exhaust tailpipe bracket decided to make a getaway last night. When I get back to base I had a look around, found a length of washing line and used it to tie the tailpipe to the rear bumper bracket. I've ordered a replacement from Rimmer Bros so my repair will do until the replacement part arrives.

Clutch replacement.

I managed to get the clutch done on Snowdrop. While I was at it I decided to paint the front floorpans. This what they looked like before:

This is what it looked like after painting. Not pretty but hopefully it will help to preseve the car. It is a definite improvement. One I got the gearbox and clutch off I found out what the problem was.The clutch plate had quite literally come apart and it was no wonder I'd lost drive quite suddenly. Once again I struggled with getting the gearbox back on and I managed to get it done with the help of an extra pair of hands. Unfortunately, I had damaged and engine mounting when jacking the engine up but fortunately I had a spare in the glove box and that was fitted. I've put some exhaust putty on the exhaust quieting it down. It will do until I can fit a replacement. I'm still looking at getting a brand new stainless steel one from the Triumph Dolomite Club. After I'd finished I vacuumed the interior out and it looks quite tidy.

At last!

I've been paid out for the Sprint. As soon as the cheque arrived I hot footed it down to the bank and paid it into my account. I can now move on with my planned improvements to Snowdrop. Before I can do that I need to sort out the clutch. I'd ordered one from Champion Motor Spares and I picked it up after work costing me £45. I'm hoping to get it fitted over the weekend. Anita's landlord is getting funny with her saying I can't do repairs on the driveway. He thinks we're not looking after the place but it isn't a mess and if I don't fix Snowdrop it won't get done. He's not a classic car enthusiast which is no surprise as he drives a Bimmer and as some of you may know I don't have a high opinion of those who own the products of Bavaria Motor Works. I'm hoping to sort the clutch hydraulics out as well. I'm going to order a new clutch salve cylinder from the Triumph Dolomite Club in a bid to cure my low biting point.

Diagnosis & door problem

Last night I fired up Snowdrop and put her in gear. She was still the same (no drive) but when she was in gear I had a look underneath to see if the propshaft was turning. It wasn't so I've eliminated a broken half shaft in the axle. The problem is either a slipping clutch or a gearbox problem. I won't know until I remove the gearbox.

This morning the front passenger door wouldn't shut properly on Blue. I tried some penetrating fluid on the latch mechanism (made no difference) and then I loosened the striker plate, moved it out a bit and after it was tightened it cured the problem. Odd.

Disaster!

I went down to the Crich show in Snowdrop when the clutch went on the M1. It was the same as a slipping clutch but it happened suddenly. I rang the breakdown service and when they got be back I jumped in Project Blue (taking Anita with me) getting to Crich 3 hours later than planned. It turned out to be a great day and we went back the scenic route going up the A6. Sure beats the M1!
I'm still puzzled as to why my poblem occurred. I suspect a worn clutch plate but as I've been typing this I'm wondering if a broken half shaft in the rear axle could be the problem. I can eliminate that one easily enough. For now Snowdrop is out of action until I can solve the problem.

Rear light replacement

I've dug out my rear light units that came off my spares 1500 and I've just fitted them to Snowdrop. The left rear indicator lens was broken and I'm sure it is affecting the left indicator. It has been like this since I bought the car. Anyway, all is well with my rear lights. Next up will be a "1300 TC" conversion that's doing the rounds on the Triumph Dolomite Club forum. (http://forum.triumphdolomiteclub.co.uk) Basically this involves taking a standard Dolomite 1300 and fitting carbs, exhaust manifold, exhaust & rear axle from a Dolomite 1500. This will result in a small gain in power, smoother running and better motorway cruising. I also want to fit some better door mirrors as Snowdrop has an ugly aftermarket door mirror on the driver's door and there isn't one on the passenger side.

Sprint claim

I rang FJ today to find out what was going on with my claim. They said they'd now recieved all the documents from me and a cheque is on it's way and I should recieve it sometime next week. When the funds are cleared I'll be splashing out on a couple of goodies. I probably won't be buying another car unless it happens to be too good a bargain to miss. We shall see...

Snowdrop's turn for some attention

I got the wheels painted and fitted new tyres on 2 of them. I got the nuts on Saturday and the following day I fitted the wheels. The pic below was before I started.

After the wheels were fitted it transformed the appearance of the car as you can see:

I filled her up with petrol (just over £50. What a rip-off!) and went for a run gently running-in the tyres. I stopped after about 30 miles to check the tightness of the wheel nuts (only a couple of the back needed nipping up) and I took this photo:

I'm planning on fitting twin carburettors (off a Dolly/Spitfire 1500) and when I get paid out for my Sprint I'll be investing in a stinless steel exhaust. This will be fit-and-forget. I also need to sort out the clutch hydraulics as the biting point is virtually on the floor. My good lady noticed that the door bottoms need attention again. I only think she noticed now that the wheels are a lot smarter than before!

Wheely good bargain part 2

Here are the wheels and after a pressure wash and the application of some "Wonder Wheels" they looked a lot better. Just need to paint the segments, replace 2 of the tyres and once I've got the correct nuts they can go on Snowdrop. Talking of which, the road tax is due and I've noticed that it has gone up to £120. The government are right thieving bar-stewards! It should be free! Anyway, the deed is done, my bank account is lighter and Snowdrop remains road legal. I had a look at the Sprint in Hull and it is pretty much complete, needs some welding on all the jacking points and the bottom of on of the front wings but seems otherwise sound. The interior is smart and clean. I reckon a good service would revive this car. I just need to transport it back from Hull. Can anybody help me?

Wheely good bargain

At the local TSSC meeting last week I was offered a set of Dolomite Sprint alloys for £40 three of which had good tyres so I decided to have them and I picked them up last night. The guy who was selling them had bought them for his Spitifre 1500 but ended up getting a set of Minilites which was the reason for selling the Sprint alloys. They need a good clean (still got some Wonder Wheels left from when I cleaned up the wheels on my Sprint) and one wheel needs the segments painting (got enough black Hammerite smooth left) but I reckon I've got a bargain. They're better than the ones that were on my Sprint. I'll need to get the nuts which will cost me the same again but it's not worth skimping on such a critical item.

On a slightly better note, I've come across a Dolomite Sprint which might be a good replacement for my late lamented Sprint. At £200 it is worth a punt and I've spoken to the owner and it sounds like it doesn't need much work to get it back on the road. With the Easter holidays coming up I should be able to go and view the car. If I get this car I'll be doing the Round Britain Run in it so I could get my co-driver (Brian) to do the work. He'll get it roadworthy no problem and he's got a garage with everything he needs.

Aonther one lost

I finally rang the police to report Baby Blue stolen and I was referred to the local council who referred me to the police officer who had dealt with it. He told me that the car had been trashed and was taken away. The strange thing was that it wasn't on the PNC even though I have a current V5C in my name. Maybe it is because she hasn't been taxed since 1994. I can't do anything about it now and if I could I don't think it is worth spending any money on getting her back. The car owes me nothing so that isn't a problem that way. I don't like to see this car ending up as a cube but my hands are tied. I doubt that the scrappers would let me have the car back as I don't have the police to back me up.

Got another letter from Footman James asking for the Sprint's V5C. I ain't letting them have it as I'm disputing their derisory offer and I want to keep the salvage.

This means that I'm down to 3 cars and 2 of them are road legal. Snowdrop's road tax is due at the end of this month so that's where my money has to go. Not only but also I only have one car (Becky) that needs to be put back on the road.

Not at all good...

Baby Blue has turned up at a local breakers. I only found out when I went onto the Triumph Dolomite Club forum and saw a thread about it. I was shocked! I must admit that I haven't been to where I was keeping the car. I have my suspicions as to who was behind this. Isn't there laws against this? She was taken away without my knowledge or permission.

On a not much brighter note my insurers have offered me £900 for my Dolomite Sprint but they won't let me keep the salvage. Looks like I'm gonna have to fight them on this one. Whoever said that "the only way to depreciate a Dolly Sprint is to write it off" was right.

Well and truly written off

I spoke to Footman James and I was told that the Sprint is a Category B write off so I won't be able to get the salvage back. This means that I'll have to take the money and run. Hopefully, they'll make me a decent offer. If it is more than what I paid for the car then I'll be happy enough.

Er, haven't I been here before? I'm getting deja-vu...

Taxing

The road tax is due on my Sprint so as the car's a write-off I've declared SORN. That's £180 I would have had to fork out had the car still been on the road. In some ways it is a blessing in disguise and another reason not to get a Sprint or even an 1850. The Dolomite 1500HL I was offered (I'm still interested Neil!) is quite tempting. I e-mailed the insurance and I'll be following up with a phone call later on today.

Oil changes part 2

I've now got the oil and filter changes done on both cars. I also replaced the fuel filter on Blue. As expected there was some crap so hopefully, I've finally banished the fuel problems for good. I've not heard anything further from the insurance about the Sprint. I'm still condiering my options on what to do. The replacement WILL be a Triumph and not necessarily a Sprint or even a Dolomite. It depends on what comes up at the right price at the right time.

It lives

I managed to revive Snowdrop. First up I bought new points and condensor on Friday after work. I fitted them when I got home but the car wouldn't start. Today I bought new plugs, leads, dizzy cap and rotor arm. I fitted the rotor arm first and tried the car and she started first time. I'm not pissed off at buying all these parts are the car is due a service anyway so I fitted the rest of the bits and all is well. I'll be doing oil and filter changes on Snowdrop and Blue but now I've brought Snowdrop back to life I'll need to take her for a run to get the oil warm before I change it.

Breakdown

I went to the local TSSC meeting in Snowdrop last night and on the way back she died on me. I checked the obvious things and came to the conclusion that there was no spark at the plugs. If I had my feeler gauges I would have been able to fit the spare points/condenser assembly that got me off the M1 last year. I called out the recovery and the guy came to the conclusion that the condenser had failed as the points were sparking but there was no spark at the spark plug leads. He didn't have any feeler gauges so I ended up going home on the back of the recovery vehicle. I probably won't be able to do anything with this car until I do the oil change. This means I'm back down to one useable car in Blue.

I've heard nothing from the insurance. I hope I don't get stung for lots of storage charges at the recovery place. I've got quite a few options on the Sprint but I think a replacement car will probably be the way forward. Whether it will be another Sprint, that remains to be seen.

Oil changes

Like a bus service you wait ages then 2 come together. Snowdrop's oil and filter change is overdue. The oil I'd bought for the Sprint's next oil change will be used for Snowdrop. Project Blue is a few hundred miles away from an oil and filter change so all I needed was filters for both and oil for Blue. I needed some screenwash so that little lot came to just over £26 from my local Motosave. While I was there I checked Blue's oil and it was below the minimum mark on the dipstick so I immediately topped up with the oil I had left from the last oil change. The guys at Motosave were good. I gave them the registration numbers and they came up trumps! The oil changes will have to wait until next week as I'm going to Stoneleigh this weekend for the first show this year. I'm going down on the Saturday to help with the Triumph Dolomite Club (Club Triumph had their turn last year!) which means I get free entry! I'm booked in at the nearest Express Holiday Inn so no problems with accommodation like last year!

All tanked up

At last I finally got round to fitting the replacement petrol tank for Project Blue. I took advantage of some free time today and some dry weather. I sprayed the top half of the tank with some black Hammerite smooth (the bottom half has underseal on it) then I removed the old tank and fitted the replacement tank. It went well and I fitted a new fuel filter. I was able to get most of the petrol out and in the replacement tank so I can make it to a petrol station. I think a road test is beckoning...

While I was in a spannering mood I fitted Project Blue's original carbs onto Becky, hooked up some jump leads, a few squirts of Easystart and hey presto SHE RUNS! Like a bag of spanners but the car is a runner. (just!) I think I'm in with a chance of getting this one back on the road.

My suspicions are confirmed...

I've just got a leter from the assessors and the Dolomite Sprint is a total loss. From their letter they're assuming that I'm not going to keep the salvage. I'd better get the claim form sent off. I'd like to use this car as a donor for another Sprint. Somebody even suggested transplanting the Sprint running gear into Snowdrop. Now that would be a real Q car especially if I kept the steel wheels!

Insurance claim

I rang Footman James to put in my claim. They were helpful and said an assessor would be round to look at the car in a few days. Meanwhile I went round to the recovery place to clear out the rest of my stuff. A couple of the guys in the yard were helpful. I gave the recovery firm my insurance details so I won't have to worry about storage costs. One of my Dolomite friends has offered me a bodily sound Sprint so I may be able to ressurect the car in some shape or form but I'm getting too far ahead of myself at this point. I'll have to wait and see if the car's a total loss (highly likely) and what the insurance will offer me.

I think I've killed it...

Last night on my way to Anita's house I lost control of the Sprint on a dry straight road which was well lit. The back end broke away to the right so I steered to the right to straighten up then it went the other way and ended up going sideways and hit a cable box. The nearside has been pushed in with the rear door taking the most damage. The B post is bent and the rear of the car is misaligned. Fortunately, I was just a bit shaken up but otherwise uninjured. Amazingly, the car was still drivable so I was able to park up and call the recovery service. The Sprint is now stored at the recovery company's yard (they have storage facilities) and Project Blue has been put back into use. I can't understand how I lost control. I've been up and down this same stretch of road in all weathers (especially during the recent rain) on a daily basis and I've never had it slide out of control. The only explanation I can think of is that there was some diesel on the road (this has killed many a Triumph through no fault of the driver) causing me to lose all grip. I'm glad that I didn't hit any other cars. I suspect that this car is beyond repair due to the distortion of the bodyshell. I'll have to see what the insurance says. A sad end to such a fine car...

Starter motor troubles

This problem has been coming on gradually and now it is getting to the point where I need to address it. What happens is when I turn the key the starter will click. It takes several tries until the starter spins. I've asked the question on the Triumph Dolomite Club forum and it looks like that either the connections are dirty or the starter needs to be reconditioned. I'm hoping to remove the starter tomorrow if the weather stays dry.

Insurance

I've got my renewal quote from Footman James. Just short of £400 so I've gone ahead with the renewal. Over for another 12 months and not bad considering I've got 4 of my cars on the policy. One more thing out of the way! The next thing will be the road tax on the Sprint.

Sorted!

Yesterday I went over to S&S to pick up the fan assembly. It was complete with the fan blades and at £25+VAT it was well worth it. Simon & Steve are great guys - true enthusiasts. I spent more time chatting with them. The place is an Aladdin's cave of TR7 parts. I wouldn't mind a TR7 myself but I've too many Triumphs!

The weather was dry so when I got home I got down to the spannering. The old assembly came off quite easily but the bolts were awkward to get at. Fitting the replacement wasn't too difficult but once again the bolts were awkward to get back in but with the help of my 1/2" spanners (no room for a socket & ratchet) I got there in the end. I also fitted the new fan belt I'd bought from Rimmer Bros and tensioned it up. The old one is now in the boot as an emeergency spare. While I was at it I removed and refitted the bracket for the air cleaner trunking as it was held on by only one bolt. It is fitted to the right of the radiator sharing it's mounting bolts. I'd fitted it in a bit of a rush using only the top bolt. I repositioned the battery clamp as it wasn't quite in the right place and I finally fitted the loose exhaust clamp. It had been like that since before my Irish jaunt! The result - it works a treat! I found out why the battery clamp had been moved. When the car was ticking over the air cleaner would come into contact with the battery clamp. I suspect that an engine/gearbox mounting is the root cause. I'll have to dig out the list that Carl (who owned the Sprint before Mark) had done.

The sh*t really has hit the fan!

It's finally happened. The fan has decided to let go just as I was setting off tonight. Fortunately, it hasn't done much damage. When I took a look I noticed that the tolerance ring had broken so I'm wondering if that was the cause. I'd spoken to S&S Preparations who have a second hand viscous coupling for £25 which now has my name on it. Snowdrop's going be put into service if she will start. I haven't used that car since last Saturday. I'm now forced into action if I want to get the Sprint useable again. I'm down to one useable car now. It's at times like this when I'm glad I've got a fleet. I'd have been stuffed if I hadn't sold Snowdrop!

The sh*t has hit the fan

Well not quite...

A noise has appeared and I've traced it to the viscous coupling on the fan. I've already ordered a new fanbelt and a tolerance ring from Rimmer Bros and I've sourced a good secondhand viscous coupling from a known fellow TDC member. I just wish this bad weather would let up so's I can get some spannering done. I've got an exhaust clamp that needs doing up and the wet cold weather is stopping me from doing anything.

Luck of the Irish

My trip to the Emrald Isle went without a hitch and the Sprint didn't let me down even though I went all over Ireland. The car just kept right on going. I'm in no doubt that it will finish the forthcoming RBRR which will be taking place in October. Thursday saw us going to Waterford. Friday was a trip to Belfast to the Ulster Transport Museum. Unfortunately, there were no Triumphs there but there was an Amphicar. (which had the Herald engine) On Saturday we went to Athlone which is right in the middle of Ireland. On Sunday we ended up in Dun Laoghaire (where the Boomtown Rats originally came from) before getting the ferry back. A few hours before I got on the ferry I saw a French blue Stag in Dublin. As he overtook me the driver waved at me. I didn't expect to see another Triumph in Dublin let alone a Stag!

Suspension woes

There's been a rattle with my Sprint whenever I hit a bump or a speed hump and whenever I set off there was a "twitch". It turned out that the two were related. I jacked up the OSR corner and after removing the wheel I found out what the problem was. The right hand tie bar was loose due to the nut becoming undone! Fortunately, it hadn't come off! Upon closer inspection I found out that the clip that is supposed to stop this very thing was missing on both tie bars. I suspect that whoever rebushed the rear suspension didn't reassemble it quite right. I've called Mark (the Sprint's previous owner) to see if he can shed any light on it and left a message on his answering machine (I normally HATE answering machines with a passion and I usually hang up) so I'm waiting for him to come back to me. I've got all the parts I need to replace what's missing but for the time being I've tightened up the nut and fitted split pins which is better than nothing. It has cured the problem and once I've replaced the gearbox oil (hurry up Brian!) all will be well for my forthcoming trip to Dublin next Wednesday.

The heat is (back) on

Sorry for not updating this as I've been struck down with a bad cough which kept me off work for most of this week just gone.

I went over to Brian's in the hope of trying to cure the lukewarm heater. We flushed the heater matrix (it was clear) and came to the conclusion that the heater valve was faulty. The fanbelt was retensioned and isn't squealing any more. I'm looking at tuning the carbs so I bought a decent carb balancer from my local Moss. While I was there I bought a 82 deg thermostat to see if that was the problem. Fitting the thermostat was easier than I thought and it has cured the problem. The car warms up quicker getting up to temperature as it should and the heaters are warmer than before. Problem solved!

All moved now

The move is complete & as you can tell from the pic Project Blue made it up to the new home. I comitted a schoolboy error when I reconnected the battery and ended up blowing one of the fusible links. I robbed Becky's to get the car going again and fortunately the car seems to be none the worse but I think I've killed the radio/cassette. I've got a nice Panasonic radio/cassette or I could fit that Sony CD player which was in Becky.

The Sprint's fanbelt has started squealing (only does it when I've got the headlights on - strange!) so it will need retensioning. Trouble is that it is a bit awkward to get at and the wet & cold weather hasn't really helped. I've also noticed that the overdrive sometimes slips so I'll need to check the gearbox oil level. (another awkward job when you don't have a garage with a pit!) I've fitted most of the parts that I ordered from Rimmer Bros. The wheel centres are on and I fitted the air intake hoses so the car is that bit closer to what it was like when it left the production line in 1975. I'm now on the reserve list for the Round Britain Run so if enough crews drop out then I'll be doing the run. The Dolomite Sprint is the car of choice (a no-brainer!) and my co-driver is Brian an ex-work colleague who restored a Herald 13/60 convertible. If you're reading this Brian I'll be in touch soon!

Splashing out

I've been giving the debit card a bit of stick. Well when Rimmer Bros are having a Dolomite Parts sale you've gotta take the liberty of getting a few essential bits. This is more importantly so when you've just entered your Dolomite Sprint in next year's Round Britain Reliability Run. I've have already ordered the following bits:
2 air intake hoses
2 wheel centres (missing from the rear wheels)
12 spark plugs
Air intake hose bracket (bolts on the the right hand side of the radiator)

I'm probably not done yet. I'm toying with the idea of fitting a spin-on oil filter conversion (told you the Sprint was nearly 100% original spec!) and getting a replacement engine steady bracket. I can't think of anything else I might need. The windscreen's leaking somewhere (I found water in the drivers' side footwell today) so a replacement windscreen rubber and sealing strip could be next on the shopping list. I've helped install windscreens on a couple of Dolomite Sprints before so I know what to do.

Parts on the move

I'm now at the point where the parts emporeum has to move. As I mentioned earlier there's an outbuilding which will be home to the new parts emporeum. I've now got use of my mate's van and I was able to shift one load of parts last night before my torch battery ran down. I'll be carrying on where I left off tonightby which time my torch should be fully charged. If there's enough room I'll also be getting the rest of my parts from the garage I had use of (if they're still there!). I still need to move Project Blue. This will have to wait until I've finished moving my parts. My tools are in the boot so it won't be a problem.

Moving

As I mentioned earlier Anita is moving house and the Sprint has been put into service to move stuff. It's amazing what you can do with these cars. Here it is parked on the driveway.

One of the first things I did was put this sign on the fence. I've had it nearly 18 months and I've finally found somewhere I can put it.

As you can gather I've not had any time to do any spannering. My parts collection still has to be moved along with Project Blue (once I've reconnected the battery. I removed it to charge it up). There is a small outbuilding which is suitable and it even has electricity and light so it might make a good working area (space permitting).

Good & bad.

I'm gonna start off with the bad. Project Blue has let me down big style. I was supposed to go down the the Heritage Motor Centre on Saturday. The car started to run like a bag of spanners which I put down to the fuel filter being blocked. After changing the filter it happened again so I turned back at Nottingham and I managed to get back as far as Birstall when the car died and wouldn't start again. I called out the breakdown people and got the car towed the rest of the way to Anita's house. The ongoing fuel filter blockage problem is due to a rusty petrol tank the only cure for which is replacement of the tank. Fortunately, the local Acclaim Guru has provided me with a replacement tank (rust free!) so Project Blue will be out of action until I can fit the tank. This shouldn't be too difficult because I've done it before.

Moving on to the good. I cured a small problem with the Dolomite Sprint's cooling system in that it wouldn't go above the quarter mark on the temperature gauge. The first thing I did was to replace the expanison tank cap, then I flushed the cooling system and refilled with fresh coolant. It seems to have done the trick as the heaters feel a bit warmer and the gauge reads a bit warmer but it still doesn't go above halfway. Problem solved! This car is less trouble than Project Blue at the moment.

Round Britain Reliability Run

It was suggested that as my Sprint had done the last Round Britain Reliability Run in 2006 that I should enter next year's. The entry has now opened but I'm faced with a couple of dilemmas:

Which car? Project Blue (the Acclaim CD) or the Dolomite Sprint. The Acclaim would use less fuel but the Sprint would be more fun to drive.
I will also need at least one co-driver.

The other problems that would stop me doing this run before (cost and getting time off work) no longer apply so I'm up for this one. Anybody care to join me on a 2000 mile non-stop drive around the country next October?

There's just one more thing...

...as Columbo would say. I also took the liberty of cleaning up the engine bay a little. I cleaned up the inner wings with some baby wipes. I painted the blower with some more of the black Hammerite smooth and I painted the air cleaner box with some silver Hammerite smooth.

This is the end result. A smarter looking engine bay. Not pristine but it looks a bit better.

That's it for the time being. I'm really enjoying this car. Project Blue gets a bit of use at the weekends to keep things free.

Mirror images

After doing the wheels I then got round to fitting the passenger door mirror I'd bought the week before at Stoneleigh. It came with 2 types of plinth so I decided to use the same one as the mirror on the other side.

I cleaned the paintwork where the mirror was going to go...

I then applied masking tape in order to avoid any damage to the paintwork should the drill slip. Also useful for marking where to drill.

The holes were drilled and the plinth fitted into place ready to receive the mirror.

The end result. A very useful and worthwhile addition and it looks like it came with the car when it was new.

Wheely good

I finally got round to smartening up the wheels on my Sprint. This was before any work was started.


This was after the first application of Wonder Wheels.




This was after the second application.



This was after the third application and compared to the first pic it is a whole lot better.



I then moved on to painting the segments with some black Hammerite smooth. I did some prep work by removing the flaking paint and rubbing down.

The end result! It looks much better and it may not be the best but I'm pleased with it. The best thing is that it didn't cost me a single penny as I'd already had everything I needed to do the job.

No further progress...

I don't seem to be getting anything done. Life it seems, is just getting in the way and the dark nights don't really help either. I went to see a Brian, a former work colleague (who restored a Herald 13/60) to show him my Dolomite Sprint. He was quite impressed with it. So much so that he's thinking of getting one himself. Like Blankety Blank I didn't come away empty-handed. He gave me some stuff to clean my alloys with. It is called "Wonder Wheels" which is manufacrured by CarPlan. He swears by the stuff so I'll give it a go. He's still reading my Blog (I'm glad somebody does!) so watch this space!

Been spending

I've been doing more spending of money than work on the cars. Unfortunately, my Sprint didn't end up on the Triumph Dolomite Club stand at the Restoration Show at Stoneleigh so I wasn't able to do the wheels. I did manage to get hold of a replacement clock. I had to buy a dashboard for £5 (which turned out to be from a Triumph 2000 Mk2) which had a clock. I fitted the clock and it works. The clock is a tad too slow but they can be adjusted. I bought a handbook for the Sprint (£4), a data booklet for the Acclaim (£2.50 - never seen one before. It is smaller than the handbook), a chrome passenger door mirror for the Sprint (£16) and the top bit of the gear knob for the Sprint. (£6) I didn't really need it but a brand new one does look a whole lot better. On the drive down to Coventry I was averaging between 30-35mpg with a boot full of tools and the back seat full of regalia so I'm happy with fuel consumption.

The jobs remaining are:
Fit the mirror.
Clean up the wheels and repaint the segments.
Sort out the gearbox end of the speedo cable as it's held on with a cable tie and my speedometer flickers.
Adjust the clock.
Clean the engine bay.
Replace the rear gearbox mount.

Snowdrop is for sale to raise funds for putting Becky back on the road. Becky will need the following jobs doing for starters:

Fit some carbs. I've still got Projcet Blue's carb so I might give them a try.
Sort out the blowing exhaust.
Find that exhaust clamp.
A couple of areas will need a patch.
The nearside front wing needs replacing.
The CD player will have to be refitted. I took it out to fit in Project Blue but I'm loath to remove Project Blue's original radio/cassette.
The rear arches need rubbing down and respraying.

Getting ready to do more...

I've bought some wet-and-dry paper to do the alloys on the Sprint. I'll start off with some 220 grit and finish off with some 1000 grit then I can repaint the centre with some black Hammerite smooth and the job should be a good 'un.
I've had a call from the garage saying that Snowdrop will be ready to collect at 5.00 today witha fresh MoT. The final price was £400 which wasn't too bad and cheaper than last year. Once this car is sold then I can move on to getting Becky back on the road. This will be the subject for a Triumph World article and will also be documented here and in club publications.
I just don't have enough space for 5 Triumphs. I really should be getting rid of another Triumph but I won't scrap any (done that too many times!) or sell them as spares cars. If they're on the road when I sell then so much the better.

Shedding some light on the situation

I fixed a couple of more lights. I replaced the interior bulb and it is brighter than before. I still haven't got round to sorting out the front passenger door switch. I'm hoping to take a look at it before I set off to Stoneleigh for the forthcoming Restoration Show. Once again I'll be wearing my Triumph Dolomite Club hat and I'll be on the stand in some shape or form. The Sprint might be even on the club's stand as I fix the few remaining niggles and hopefully, smarten the alloy wheels. I also sorted out the left reversing light by robbing both a bulb and a bulb holder from Baby Blue. A pity I couldn't take that car to the Restoration Show. It would be ideal. Maybe next year?

Even more niggles fixed.

Well just a couple. I replaced a couple of bulbs. The one for the (non-working) clock and the boot light. After I got home I had a look at my interior light bulb and realized that the filament had become detached at one end and a gentle tap would make the bulb work so that's another bulb to replace. When I said that the clock wasn't working I can hear it ticking but the second hand doesn't move. I wish I could get inside and find out what's up with it. Looks like a replacement clock could be on the cards. I also moved the indicator/sidelight units so that the sidelights were on the outside. This may seem picky but I like to have the car in original spec but on the other hand I don't mind the odd mod or two (such as the electronic ignition or the stainless steel exhaust) if it improves the car without detracting too much from the originality.

More niggles fixed.

With the parts liberation I forgot to mention the Sprint.

Yesterday the Triumph Dolomite Club were having a Dolomite spares day at Rimmer Bros who were offering discounts on Dolomite parts. This was the ideal opportunity to obtain some bits for my Sprint. Once again my Sprint didn't miss a beat on the way there and back. On the way there I stopped at Doncaster services on the M18 and I replaced one of the door locking knobs which was damaged. When I got there I noticed a green Sprint with a familiar number plate. I was right. It was the one that belongs to Tony Wilkins who was my co-driver on the 2006 HCR and he knew about the event. His Sprint although an N registration like mine is a 1974 car and next to his mine was running quieter. There was a tour of the warehouse which gave us an insight to what goes on at Rimmer Bros. On the tour there was plenty of Rover SD1 stuff. They reckon that with their big purchase of SD1 parts from India they have enough parts to keep Rover SD1s on the road forever. (almost!) They don't just buy up stocks of parts but they also break cars and rescue as much as possible from them.
Anyway, I didn't buy much. I ended up getting a pair of secondhand grab handles for only £5. There are left and right handed one and they only had right handed ones but they can be cannibalised.
When I got back I fitted the grab handles. One of the window winders had the handle missing so I replaced it with a spare I had. Next job will be to move the sidelight/indicator units so that the sidelights are on the outside. I'll also be sorting out the interior light as it doesn't work on all the doors when they open. Probably just dodgy connections on the door switches.

More parts liberated

I was surprised to find out that the garage where I was keeping some of my parts still had the parts there. I thought they'd been thrown out by the owner of the garage so I loaded what I could fit in my Dolomite Sprint. The doors wouldn't fit so I'll either have to use the roof bars or borrow a van from work. One way or another I'll get what I want out of there. So far I've got 2 bootlids, a rear exhaust section 2 gearboxes, a transmisson tunnel and a couple of sections of boot trim.

Another addition to the fleet

At last! I've finally got the Dolomite I've wanted. It is a 1975 Dolomite Sprint in Honeysuckle. Since getting my redundnacy money I knew I could afford to buy one. Better still the cost of adding it to my insurnace policy was just over £30. This means that I'll have to sell Snowdrop as I have too many Triumphs as it is but I'm grinning like the proverbial Cheshire Cat. The car isn't perfect but is structurally & mechanically sound. I drove it home from Coventry and it didn't miss a beat. It does have some minor niggles including:

Loose front passenger seat.

Missing pasenger head restraint.

Loose front bumper mountings.

Front passenger door not opening from the inside

Clock not working

Speedo needle wavering

Rear gearbox mounting needs replacing.

I was able to fix the first 4 items with a bit of help from the seller before setting off. The Triumph Dolomite Club are having a Dolomite Spares Day tomorrow at Rimmer Bros in Lincoln so I could be getting a few discounts on Sprint parts.

MoT work neded

As expected Snowdrop failed the MoT. Apart from the front wheel bearings and a couple of front suspension bushes (I should've Polybushed the front suspension) it is mostly welding. I was given a figure of around £450 which is quite a bit less than last year. My initial reaction was to sell the car and buy another Dolomite but since sleeping on it I've decided to get the work done. I can afford it and as an enthusiast (idiot?) I'm doing it for love and not money. If it were a 10-15 year old Eurobox I'd get rid of it but it is a 30 year old Triumph and they do need preserving. Once the welding is done I'm gonna invest in some Waxoyl (or similar) to preserve the car. If I get a small compressor I can do the rest of my fleet as well. That would be money well spent. Once that's all out of the way I can then move on to Becky. She needs some welding and then when she's got another MoT she can be rustproofed as well.

MoT time.

I've booked Snowdrop in for the dreaded MoT at the same garage where Project Blue was tested. I'll probably just pay them to have whatever work needs doing to pass. I don't have anything else new to report until Snowdrop's been tested.

Sorted!

At last! Snowdrop is now useable and with a couple of days spare before the MoT runs out. In my last post I was thinking of selling this car but I'll see what in needs for the MoT before I make a decision.
Anyway, back to the story (in the words of Ronnie Corbett) I was able to borrow a van from work on Saturday and collect the axle from Liverpool. The guy wanted some Toledo parts so I was able to deliver them at the same time. I sold him the doors, a side window and the rear bumper making myself £35. Having made a bit more room in the shed I decided to paint the rear axle in there where it would be sheltered from the elements and be able to dry overnight. The next day I got the axle fitted. It was time consuming but I got there in the end. When I came to bleed the brakes the bleed nipple sheared off. I had come across a brand new brake cylinder when I was searching for my collection of nuts & bolts so I was able to turn it up fairly quickly and fit it. The electrical gremlins were traced to the fusebox so once again a root round my box of spares turned up the Toledo's fusebox and after a bit of wirebrushing it was fitted and all the electrics were working once again. I had also bought some exhaust putty to fill a hole in the exhaust but I can still hear it blowing somewhere. If I get Snowdrop throught the MoT I might invest in a stainless steel exhaust. I'm also thinking about getting some Dolomite Sprint alloys. One of my Dolomite friends called me and he's got some among his collection of Dolomite spares having recently sold his Dolomite Sprint. (I wanted that car!)
For the MoT I'll use the same garage I used for Project Blue. Hopefully the stuff it failed on last year won't fail this time round and I hope it will cost a lot less. We shall see...

Problems

I finally had something happen with Project Blue. The alternator belt had been squealingfor a few days and I was hoping to deal with it at the weekend (my tools are in Snowdrop's boot) but last night on my way to Anita's (where Snowdrop is parked) Project Blue, instrument lights were dimmer than normal and the wipers were slow. This pointed to a discharged battery. I made it to Anita's and when I popped the bonnet I saw that the alternator belt had worn and was slipping. This explained why the battery was discharging. It was because the alternator wasn't able to charge the battery enough. It was about 8.00pm and I knew of a motor factor that was still open so I got Snowdrop started with a bit of difficulty and managed to get a replacement belt. I had no indicators, wipers or heaters but the headlights were working so I was able to use the car. Because of the faults on this car (probably due to lack of recent use) and the fact that the MoT is almost due I think I'll probably sell this car. I've been wanting to get another Triumph since I got my redundancy money and I know of a decent Dolomite 1850HL that I want but something has to go and Snowdrop will be the one to go.

Watch this space.

Replacement axle

I've managed to source a replacement rear axle for Snowdrop and it is a freebie. Unfortunately it is located in Liverpool and I'm absolutely loath to use Project Blue to pick it up. I'm going to leave it until I'm back off my holiday (I fly out next Tuesday) by which time I should be able to borrow my mate's van to pick it up.

Other than that nothing more to report.

Moving around

As I mentioned in a previous instalment I've had to move across the road. This means that Becky had to be moved as well. With the help of 3 extra pairs of hands (including Anita) and a Peugeot 405 diesel estate Becky was moved to her new resting place. That Jenolite isn't really much cop so I'll have to try the Krust instead. Anything to stop Becky deteriorating any further. I don't want Project Blue to go the same way so I waxoiled the rear wheels arches and I'll need to do the same with the sills.

Not so good.

I finished doing the axle and as soon as I'd driven less than 100 yards it went again so my welding didn't work so a replacement axle it will have to be. Triumphland in Doncaster have one for £50 but I can't afford it just yet and besides I don't fancy doing the job again so soon.

Getting there...

I've finally managed to get the axle back on the car. With a bit of help from 2 of Anita's daughters I got it back on. Just a tie bar, the brakes and propshaft to do but the hard part's over. I'll be able to get finished by the weekend. I don't seem to find much time these days with the house move and the jobhunting. My life's been turned upside down just lately.

I did it!

I finally got to use that MIG welder Anita bought me several months ago (the exact number of which eludes me!) First I did some practaice runs on an old dustbin lid until I could do a straight line. I only blew one small hole but that was with the settings on full! I then jumped in at the deep end and I managed to get the bracket welded to the axle and although it doesn't look too good it will hold at least until I can get another rear axle. I went overboard with the weld to make sure it was a good join and did a test lift. Once I was satisfied with my handiwork I then painted the axle with the black Hammerite and paintbrush I said I would buy in the previous entry. I just painted what I could get at and I'll finish the job tonight. It's amazing what a difference a coat of paint makes!

Problems with Snowdrop

Snowdrop had developed a problem. The back end was twitching and there was a knock. I got the back end on axles stands and as soon as I took the wheels off I noticed the problem.

One of the tie bar brackets had sheared at the axle. I can do one of two things:


1. Replace the axle.
2. Get the bracket welded back on.


Since either option invloves dropping the axle (2 hour job) I decided to remove the axle and try option 2 first. I'll also see if I can clean and paint the axle while it is off the car. A tin of black Hammerite & a paintbrush beckons...

Not much doing.

I'm in the middle of a house move. Parents are going to get the house done out so we're moving over the road for 6 months. This means I haven't been able to do any work on the cars. Also I've been made redundant from my job. Don't worry, I won't have to give up my Triumphs. The insurance is paid up till next February, Becky's out of tax & MoT, Project Blue had both not so long ago and Snowdrop is still road legal. This means I don't have any worries about keeping the fleet going for the time being.

Plans are afoot...

Yes, I've decided to takle the rust on Snowdrop before it takes hold and fail's the MoT which will be due in October. I've decided not to use the last of my Jenolite and instead bought some Krust which a couple of my Triumph friends (Martin & Jon) have used on their cars with success. I just need some white Hammerite smooth and Snowdrop will be looking a bit better. I've already done the wheels so it is the bodywork's turn to have some treatment.

Not much to report...

Well what can I say? Project Blue has been running like a dream and going through fuel filters. The pic above was taken at Woodvale and the car didn't miss a beat.

After Woodvale we decided to go to Southport as the weather was nice and I hadn't been in over 20 years. As you can tell you can still park on the beach...

Project Blue from another angle.

I got Anita to pose with me and the car. The tide is about 3 miles out! Also on a clear day you can see Blackpool Tower.

More news

First up, I've nearly done a thousand miles in Project Blue and she is still going strong. Now that Project Blue is running like a dream I've gone and SORNd Becky. I can't justify spending money on that car after throwing money at Project Blue. I'll sell her to the Guru who will give her a good home.

In the Dales

After Hawes was the obligatory photoshoot. I took quite a few pics from all angles but this one was my favourite. The weather wasn't the best but I liked the angle nonetheless.

This was too good to miss. We were driving along when Anita spotted these chickens. I agreed that it would merit a photo so we parked up and I took the pic. They weren't scared of me but when Anita suggested I sit down and have my pic taken with them they moved so I wasn't the only one who didn't like the idea!

Anita wanted to feed the chickens so she scrunched up some Pringles and threw them out. The chickens soon went for them. As I was setting off I was a bit worried of running over one or two of them (no free chicken dinner then!) but they moved away as soon as I started the car up.

After that I decided to go to Morecambe which is quite close to the Dales. By this time the Currant Bun decided to make an appearance. The walk along the seafront was a pleasant one. The journey home was done mostly on motorways and the car didn't put a foot wrong or miss a beat so I've definitely solved the running problems. I'd clocked up just over 200 miles and the fuel gauge was just under halfway so I'm pleased with fuel consumption. I can now trust this car to the ends of the Earth and back!

A nice little reliability run

Having got Project Blue running like a dream I decided to have a run out into the Yorkshire Dales. First port of call was the Wensleydale Creamery in Hawes and here I am at the car park. Anita was with me so I got her to take the pic.

At long last!

I've finally got Project Blue running perfectly. Once I'd fitted Becky's carbs the car ran absolutely 100% perfect. No erratic idling, no lack of power and no drinking petrol. I've clocked up a few more miles (just passed the 23,000 mark) & I'm hoping to clock up a few more before I'm back at work a week on Monday.

Still having problems

Project Blue is a thirsty car. Spark plugs are blackened. It is a dry black so that points to a rich mixture. I've cleaned the carbs as much as I could so I'm going to take desparate measures and cannibalize Becky. She's gonna be off the road as the tax is due at the end of this month and MoT is due before the end of August and isn't likely to pass without throwing lots of money at her so she might as well contribute to a worthy cause. What's left can then go to the Guru.

The Bradford Classic

Project Blue made her debut at this year's Bradford Classic. She perfomed flawlessly so I think I've finally nailed the running problems. Just needs a few more miles clocking up and then all will be fine.

Success!

At last! The car runs fine. I bought & fittted the parts and it ran. I took it for a run and apart from a lumpy idle it is fine. Just need to tune it up and it should be fine. I'll start again from the beginning now I know I've got new ignition parts. I still reckon that this car needs more use than it has been getting so I filled up with petrol for the first time and gave it a jet wash. The Bradford Classic is on tomorrow so I'll be able to take Project Blue.

Still no better

Project Blue still isn't running right. I'll replace the spark plugs (for the 3rd time!), leads, rotor ram & distributor cap. Other than that not much more to report.

On the up.

The weather stayed dry so I was able to fit the petrol tank. First up I took the fuel sender unit off and squirted lots of Double T (similar stuff to WD40) inside the sender and I got it working. Once that was refitted I put the tank back on (easy once you've taken it off) added some petrol and stated the car up. It seemed to run a bit better. I went down to my local Morrisons and put some more petrol in and gave the car a run on the motorway. I'm sure this has helped because it was running better (not cutting out whenever I stop the car) and after adjusting the idling I paid a visit to Barry the Acclaim guru. He was impressed with the car and he diagnosed loose weights in the distributor as there was a noise coming from there. I went away and removed the distributor and dismantled it. Lo and behold the weights weren't loose so I cleaned the inside of the distributor with some Double T and put it all back together, got the car running again, added some more petrol (the gauge works now) and took it for another motorway run. It has been fine ever since. I think this car needs to be used so I'll put it into daily use and see how it goes.

A start...

I managed to drop Project Blue's petrol tank which wasn't too bad. I found out why the fuel gauge wasn't working. The sender was faulty so I rang Barry the Acclaim guru and he said that he had some but they were inaccessible so I'm going to have to put the faulty one back. I put a 50/50 mixture of petrol and water in, gave it a shake and left it for 30 mins. While I was waiting I went to a local motor factor and got a fuel filter that is almost identical to the original. Unfortunately it started to rain before I got back home so I drained the tank, refitted the sender unit, put my tools away and pushed the tank under the car. I'm gonna have to call it a draw on this one for tonight.

The problems continue

Project Blue is still giving me grief. I was left stranded in Saltaire with a blocked fuel filter. I called out the RAC (I get free membership courtesy of my bank) and the patrolman diagnosed a faulty fuel pump (they don't work when the filter is blocked!) and towed me home. I've since replaced the filter but the car still won't idle in it's own and a 1000rpm the car runs rough. I even removed the carbs, took off the float chamber covers (which I've been loath to do up to now) and cleaned the jets out. I'm going to have to face the inevitable and drop the fuel tank and clean it out. I can't see what else I can do. All I need now is some decent weather.

Project Blue is now road legal

At last! I've now got a tax disc. After work I went straight to the DVLA office in Leeds to get the taxation class changed. The process went smoothly but getting in and out of Leeds was a nightmare during the rush hour. Anyway the worst is over (I hope) and I plan on clocking up a few miles on the shakedown. My cunning plan is to fill up with petrol and add a concentrated dose of Redex to get thos carbs cleaned out. I need to adjust the throttle & choke cables as well. I hope that the fuel problem will come right.

At last!

I've finally got that all-important piece of paper. Project Blue finally has an MoT for the first time since 1993. The car still isn't runninf properly but I reckon a good run should help. I've added £5 worth of petrol and some fuel additive. Next up will be the tax disc. I'll also have to change the taxation class from "Disabled" to "PLG". I don't qualify and I certainly ain't gonna cheat our robbing Government so this means a visit to my local DVLA office in Leeds. I just hope I can get there before it closes tomorrow.

MoT problems

Did you really expect Project Blue to pass? I don't think so! Main failure points were the brakes (despite new pads, shoes and fluid) and emmissions (caused no doubt by the RH carb running rich) so nothing major and once I've got that piece of paper I can then move on to the next stage which will probably be another story in itself!

MoT time for Project Blue

Finances have improved so I decided to book Project Blue in for the MoT. I tried a different garage which a mate uses and the soonest will be Monday so I dropped the car off after work today. I can't see it failing on much. We shall see...

This must be one of the lowest mileage Acclaims about. The condition of the interior backs up the low mileage.

Another interior shot. That lovely velour upholstery is unmarked. I doubt that back seats have ever been sat in!

Just thought I'd post some pics. This car has been unmolested and here is the original radio/cassette and it is in working order.

Acclaimed!

I've been working on both of my Acclaims. First up I managed to improve Becky's handbrake. I took the drums off and adjusted the self-adjusters until I was just able to fit the drums and it has made a difference. I did the same with Project Blue and I've got a working handbrake there. With the addition of £5 worth of petrol I got Project Blue running and drove her round the block. There seems to be a flat spot above 2000 rpm. I should follow the advice I was given and put some additive in the tank. With only a small amount of petrol the concentrated dose should do the trick!

More work on Becky

I made a start on treating the rust that has started to appear. I applied Jenolite on the wheel arches and one of the sills has also started to dissolve so I'll be looking at a replacement sill. I'm surprsied that it got through last year's MoT.

I removed Project Blue's mixture screws and squirted some carb cleaner into the holes. I need to put some more petrol in that car but lack of funds has put a hold on that.

Got it sorted!

I managed to source a replacement inlet manifold from the Guru. I bought some more Hylomar, an thermostat and some Radweld (the radiator I'd fitted was leaking slightly) and set to work. Things went quite well until I came to fit the thermostat. There was a rubber seaing ring on the thermostatat and when I bolted the housing down it cracked! Fortunately, I had a spare so that was put into service. This time I removed the sealing ring and used Hylomar instead. To avoid the problem which I'd encountered in the first place I used copper grease on the thermostat housing bolts when I tightened them. The troubles didn't finish there. The top hose was leaking so I ended up replacing that with a spare one I had. After that I refilled the cooling system and the car has been fine since. Better still, it is running cooler than before. The needle sits above the notch on the gauge only rising to just above halfway when idling in traffic. I believe that replacing the thermostat has made a difference.

From bad to worse

I tried drilling and tapping the studs that had sheared off and one side was fine but the other side didn't work so that means I'll have to replace the inlet manifold. Hopefully, the local Acclaim guru will have one spare otherwise I'm stuffed! Before anyone suggest it, no I'm not robbing any more bits off Project Blue!

Disaster!

I don't have anything to report for ages (I was rained off recently with last week's 48 hour rainathon!) and then something goes wrong.

Becky's been losing coolant like nobody's business just lately so I decided to swap the Triomatic radiator that I put in with the correct radiator that I have in my collection of Acclaim spares. One of the thermostat housing bolts sheared off. I was hoping that it wouldn't leak but it is. This means I'm gonna have to drill out the remains of the bolt and retap the thread or get one of those stud extractors. Another alternative would be to get another inlet manifold but this involves removing the carburettors. For now I've had to put Snowdrop back into service until I can sort this little problem out. I hope the weather stays dry.

One more thing eliminated

I finally got round to doing a compression test on Project Blue and all 4 cylinders were giving a reading of 12 bar each so the engine is fine. One thing less to worry about. The filter had caught some more crap so I cleaned it out using some carb cleaner. I think I need more petrol as well.